OMRON CX-Process Monitor Plus Software

CX-Process Monitor Plus Software

Monitors and controls operation of function blocks in loop control units

The CX-Process Monitor Plus is HMI (human-machine interface) software that can easily configure standard screens from the tag information created with the CX-Process Tool.

Read more »

OMRON CX-Programmer Software

CX-Programmer Software

Improve Productivity for SYSMAC PLCs from Ladder Program Development and Unit Setup to Debugging and Maintenance

• Application software to create and debug programs for SYSMAC CS/CJ/CP/NSJ-series, C-series, and CVM1/C-series CPU Units.
• Easily achieve position control with wading through user manuals.
• Complete support for synchronous operation between units.
• Easier connection to PLCs.
• Batch backup/restore with a computer.
• Comprehensive programming environment.
• High program readability.
• Time required for onsite startup and debugging has been significantly reduced.

Features

• Easily Achieve Position Control with Wading Through User Manuals.
• Complete Support for Synchronous Operation between Units.
• Easier Connection to PLCs.
• Batch Backup/Restore with a Computer.
• Comprehensive Programming Environment.
• High Program Readability.
• Time Required for Onsite Startup and Debugging Has Been Significantly Reduced.


Applicable Models 

CS/CJ/CP-series
CS-series

• CS1H-CPU63/64/65/66/67 (-V1)
• CS1G-CPU42/43/44/45 (-V1)
• CS1H-CPU63H/64H/65H/66H/67H
• CS1G-CPU42H/43H/44H/45H
• CS1D-CPU65H/67H
• CS1D-CPU42S/44S/65S/67S

 CJ-series

• CJ1G-CPU44/45
• CJ1H-CPU65H/66H/67H/64H-R/65H-R/66H-R/67H-R
• CJ1G-CPU42H/43H/44H/45H
• CJ1M-CPU11/12/13/21/22/23
• CJ2H-CPU64-EIP/65-EIP/66-EIP/67-EIP/68-EIP
• CJ2H-CPU64/65/66/67/68
• CJ2M-CPU11/12/13/14/15/31/32/33/34/35

 CP-series

• CP1H-XA40DR-A/XA40DT-D/XA40DT1-D/X40DR-A/X40DT-D/X40DT1-D/Y20DT-D
• CP1L-M60DR-A/M60DR-D/M60DT-A/M60DT-D/M60DT1-D/M40DR-A/M40DR-D/40DT-A/M40DT-D/M40DT1-D/M30DR-A/M30DR-D/M30DT-A/M30DT-D/M30DT1-D
• CP1L-L20DR-A/L20DR-D/L20DT-A/L20DT-D/L20DT1-D/L14DR-A/L14DR-D/L14DT-A/14DT-D/L14DT1-D/L10DR-A/L10DR-D/L10DT-A/L10DT-D/L10DT1-D
• CP1E-E40DR-A/E30DR-A/E20DR-A/E14DR-A/E10DR-A/E10DT-A/E10DT1-A/E10DR-D/10DT-D/E10DT1-D
• CP1E-N60DR-A/N60DT-A/N60DT1-A/N60DR-D/N60DT-D/N60DT1-D/N40DR-A/N40DR-/N40DT-A/N40DT-D/N40DT1-A/N40DT1-D/N30DR-A/N30DR-D/N30DT-A/N30DT-D/30DT1-A/N30DT1-D/20DR-A/N20DR-T/N20DT-A/N20DT-D/N20DT1-A/N20DT1-D/N14DR-A/N14DT-A/N14DT1-A/N14DR-D/14DT-D/N14DT1-D
• CP1E-NA20DR-A/NA20DT-D/NA20DT1-D

NSJ-series
NSJ Controller

• NSJ5-_-G5D
• NSJ8-_-G5D
• NSJ10-_-G5D
• NSJ12-_-G5D
• NSJ5-_-M3D
• NSJ8-_-M3D

C-series
C1000H

• C1000H-CPU01

C2000H

• C2000H-CPU01 Simplex system

C200H

• C200H-CPU01/02/03/11/21/22/23/31

 α-series

• C200HX-CPU34/44/54/64
• C200HG-CPU33/43/53/63
• C200HE-CPU11/32/42
• C200HX-CPU34-Z/CPU44-Z/CPU54-Z/CPU64-Z/CPU65-Z/CPU85-Z
• C200HG-CPU33-Z/CPU43-Z/CPU53-Z/CPU63-Z
• C200HE-CPU11-Z/CPU32-Z/CPU42-Z
• C200HS C200HS-CPU01/03/21/23/31/33

CPM1A-series

• CPM1 (A)-10CDR/20CDR/30CDR/40CDR (-V1)

CPM2A-series

• CPM2A-20CD/30CD/40CD/60CD

CPM2C-series

• CPM2C-10CD/10C1D/20CD/20C1D

CPM2@-S@

• CPM2C-S100C/110C
• CPM2C-S110C-DRT

CQM1

• CQM1-CPU11/21/41/42/43/44/45

CQM1H-series

• CQM1H-CPU11/21/51/61

CVM1/CV-series
CV1000

• CV1000-CPU01 (-V1)

CV2000

• CV2000-CPU01 (-V1)

CV500

• CV500-CPU01 (-V1)

CVM1

• CVM1-CPU01/1 (-V1)

CVM1-V2

• CVM1-CPU01-V2/CPU11-V2/CPU21-V2

FQM1 

• FQM1-CM001/CM002 Coordinator module
• FQM1-MMA21/MMA22/MMP21/MMP22 Motion control module

IDSC 

• IDSC-C1DR-A/C1DT-A

SRM1 

• SRM1-C01/C02 (-V1/-V2) 

Read more »

OMRON CX-Simulator Software

OMRON CX-Simulator Software

Increase Development and Debugging Efficiency with Various Debugging Tools, Including Functions That Are Not Possible on the Actual PLC

• Application software to simulate SYSMAC CS/CJ/CP/NSJ Series CPU Unit operation on the computer to debug PLC programs without a CPU Unit.
• Apply virtual external inputs to a virtual CPU Unit to debug programming.
• Execute programs by steps or with break point settings, or use any of the many other debugging functions.
• Check the cycle time during simulation.
• Debug network communications and serial communications as well.

Applicable Models 

PLC 
CS Series

• CS1H-CPU63/64/65/66/67
• CS1G-CPU42/43/44/45
• CS1H-CPU63H/64H/65H/66H/67H
• CS1G-CPU42H/43H/44H/45H
• CS1D-CPU65H/67H
• CS1D-CPU42S/44S/65S/67S

CJ Series

• CJ1M-CPU11/12/13/21/22/23
• CJ1G-CPU44/45
• CJ1H-CPU65H/66H/67H/64H-R/65H-R/66H-R/67H-R
• CJ1G-CPU42H/43H/44H/45H
• CJ2H-CPU64-EIP/65-EIP/66-EIP/67-EIP/68-EIP
• CJ2H-CPU64/65/66/67/68
• CJ2M-CPU11/12/13/14/15/31/32/33/34/35 

CP Series

• CP1H-XA40DR-A/XA40DT-D/XA40DT1-D/X40DR-A/X40DT-D/X40DT1-D/Y20DT-D
• CP1L-M60DR-A/M60DR-D/M60DT-A/M60DT-D/M60DT1-D/M40DR-A/M40DR-D/40DT-A/M40DT-D/M40DT1-D/M30DR-A/M30DR-D/M30DT-A/M30DT-D/M30DT1-D
• CP1L-L20DR-A/L20DR-D/L20DT-A/L20DT-D/L20DT1-D/L14DR-A/L14DR-D/L14DT-A/L14DT-D/L14DT1-D/L10DR-A/L10DR-D/L10DT-A/L10DT-D/L10DT1-D
• CP1E-E40DR-A/E30DR-A/E20DR-A/E14DR-A/E10DR-A/E10DT-A/E10DT1-A/E10DR-D/E10DT-D/E10DT1-D
• CP1E-N60DR-A/N60DT-A/N60DT1-A/N60DR-D/N60DT-D/N60DT1-D/N40DR-A/N40DR-D/N40DT-A/N40DT-D/N40DT1-A/N40DT1-D/N30DR-A/N30DR-D/N30DT-A/N30DT-D/30DT1-A/N30DT1-D/N20DR-A/N20DR-T/N20DT-A/N20DT-D/N20DT1-A/N20DT1-D/N14DR-A/N14DT-A/N14DT1-A/N14DR-D/N14DT-D/N14DT1-D
• CP1E-NA20DR-A/NA20DT-D/NA20DT1-D

NSJ Series

• NSJ5-_-G5D
• NSJ8-_-G5D
• NSJ10-_-G5D
• NSJ12-_-G5D
• NSJ5-_-M3D
• NSJ8-_-M3D 

Read more »

OMRON CX-Protocol Software

CX-Protocol Software

Reduce the Work Required to Create Data Communications Protocols for General-purpose Devices

• Application software to create protocols (communications sequences) between SYSMAC CS/CJ/CP/NSJ-series or C200HX/HG/HE Serial Communications Boards/Units and general-purpose external devices.
• Create protocols for general-purpose devices connected to PLC Boards or Units via RS-232C or RS-485A/422.
• Transfer the protocols to PLC Boards and Units.
• Repeat steps or branch/end steps according to response contents.

Applicable Models 

PLC 
CS Series

• CS1H-CPU63/64/65/66/67 (-V1)
• CS1G-CPU42/43/44/45 (-V1)
• CS1H-CPU63H/64H/65H/66H/67H
• CS1G-CPU42H/43H/44H/45H
• CS1D-CPU65H/67H
• CS1D-CPU42S/44S/65S/67S

CJ Series

• CJ1M-CPU11/12/13/21/22/23
• CJ1G-CPU44/45
• CJ1H-CPU65H/66H/67H/64H-R/65H-R/66H-R/67H-R
• CJ1G-CPU42H/43H/44H/45H
• CJ2H-CPU64-EIP/65-EIP/66-EIP/67-EIP/68-EIP
• CJ2H-CPU64/65/66/67/68
• CJ2M-CPU11/12/13/14/15/31/32/33/34/35 

CP Series

• CP1H-XA40DR-A/XA40DT-D/XA40DT1-D
• /X40DR-A/X40DT-D/X40DT1-D
• /Y20DT-D 

NSJ Series

• NSJ5-_-G5D
• NSJ8-_-G5D
• NSJ10-_-G5D
• NSJ12-_-G5D
• NSJ5-_-M3D
• NSJ8-_-M3D 

SYSMACα Series

• C200HX-CPU34/44/54/64
• C200HG-CPU33/43/53/63
• C200HE-CPU32/42
• C200HX-CPU34-Z/CPU44-Z/CPU54-Z/CPU64-Z/CPU65-Z/CPU85-Z
• C200HG-CPU33-Z/CPU43-Z/CPU53-Z/CPU63-Z
• C200HE-CPU32-Z/CPU42-Z 

CQM1H Series

• CQM1H-CPU11/21/51/61 

Communication Boards/Units 
CS Series

• CS1W-SCU21(-V1)/SCU31-V1/SCB21(-V1)/SCB41(-V1) 

CJ Series

• CJ1W-SCU21(-V1)/SCU31-V1/SCU41(-V1) 

SYSMACα Series

• C200HW-COM04(-V1)/COM05(-V1)/COM06(-V1) 

CQM1H Series

• CQM1H-SCB41 

Read more »

CV1M - OMRON PLC SYSMAC CV1M

SYSMAC CVM1 Programmable Controller 

High-speed Control for Large-scale Machinery with SYSMAC CVM1

The SYSMAC CVM1 brings intelligence to large-scale machine control. A faster and more complete instruction set simplifies process control, data processing, and other control tasks. And there's plenty of I/O capacity to handle large-scale systems with CPU models that support up to 2,048 local I/O points. 

You also get three-level network communications with SYSMAC LINK, Controller Link, and/or Ethernet networks to easily achieve high-speed system control. The SYSMAC CVM1 is the ideal Programmable Controller for machine control in systems requiring data processing.


Features

Better Functionality

Simplify Complex Control Operation with New Instructions (125 Instructions with 204 Variations)

Floating-point arithmetic, symbol math, PID, and many other new instructions have been added to simplify everything from data processing and process control through high-speed positioning and other complex operations. It all adds up to more efficient programming.

Capacity to Handle Large-scale Control: New CPU with 2,048 I/O Point Capacity

A 62K-word user memory and 24K-word data memory also provide the added capacity needed to handle complex operations for large-scale control.

System Control through Advanced Units

A Motion Control Unit provides 4-axis position control capability, while a Personal Computer Unit places DOS right on the PC Rack. And a Temperature Controller Data Link Unit manages data from multiple temperature controllers. These, and other CPU Bus Units achieve easy system control.

SYSMAC C-Series Compatibility

The SYSMAC Support Software allows you to program ladder diagrams that can be used both for the CVM1 and for C-series PCs.

Complete Communications

High-speed Communications

Various networks provide communications designed for essentially every level of FA production: between PCs, between PCs and host computers, or between PCs and other system components. High-speed communications processed asynchronously with the PC's cycle time are also possible.

Communications Across Three Hierarchies

Connect Programming Devices to monitor and program the local node or go through Host Link, SYSMAC LINK, Controller Link, Ethernet, or SYSMAC BUS/2 networks to monitor and program other nodes. You can also connect Programming Devices to Remote I/O Racks or Expansion I/O Racks to enable monitoring and programming across networks.

Ethernet

The CVM1 communicates easily with computers via an Ethernet network using the TCP/IP or UDP/IP international protocols. The CVM1's Ethernet Unit also supports a File Transfer Protocol, which enables file transfers as well. FINS (Factory Interface Network Service), a message communications protocol developed by OMRON for its FA controllers, also enables easy reading and writing of PC memory.

• CPU Bus Units Let You Take Full Advantage of FA Networks

• Build a Large-scale FA Network with Complete Communications

Read more »

CVM1D - OMRON PLC SYSMAC CVM1D

OMRON SYSMAC CVM1D Programmable Controller   

Double Power Supply Units and CPU Units Offer High Reliability 

CVM1D Programmable Controllers inherit the advantages from the CV/CVM1 Series and go a step further by incorporating double systems for higher reliability.

These PCs are available as a simplex system with double Power Supply Units or as a duplex system with double Power Supply Units and CPU Units. Duplex systems offer even higher reliability than conventional CV/CVM1-series systems.

Features of OMRON PLC SYSMAC CVM1D

Duplex System 

Hot Standby Method

 The hot standby method is a method where the two CPU units are simultaneously performing calculating functions. One CPU Unit performs control functions and the other is placed on standby while it is executing the calculating functions. 

 If the CPU Unit performing control functions detects an error and stops, then control functions switch immediately over to the CPU Unit that is on standby. The two CPU Units are synchronized to process program, data memory, timer, counter, and other data in order to ensure a smooth transition between them.

Online I/O Unit Switching 

I/O Units on CPU, CPU Expansion, and I/O Expansion Racks can be replaced from the Programming Console while the system is running unless a Special I/O Unit is mounted on the same Rack.

Advanced Communications Functions

Compatibility with information-based networks

Data can be exchanged with a host computer through an Ethernet Unit via the TCP/IP, UDP/IP and FTP information-based network protocols.

Communications between CVM1 and CV, CVM1 and C, as well as between CVM1 Units 

Controller Link, SYSMAC LINK or other Link Units can be used to build networks that link Programmable Controllers for C, CV, and CVM1 Units.

Building multi-vendor networks using CompoBus/D 

CompoBus/D can be used to build a component bus capable of controlling a maximum of 63 Remote I/O Units, or a combines maximum of 2,048 I/O points. Since CompoBus/D conforms to DeviceNet standards, any DeviceNet slave units made it the world can be used on the network.

Inherits Advantages from the CVM1 

Able to use CVM1 I/O, Special I/O, and Communications Units

The present system can use the wide array of available SYSMAC C-series Units as well as C and CVM1-series programs.

Inherits vast array of functions from the CVM1 

• Built-in-clock function
• Built-in peripheral interface
• Built-in host link
• Vast array of instructions
• Space-saving design
• Excellent cost performance
• High Speed and Large Capacity
• High-speed Processing at 0.125 µs

The present system is capable of processing basic instructions at less than 0.125 µs and special instructions at less then 0.5µs, thus ensuring higher machine productivity.

Large 62K-word program capacity and 24-K word data memory capacity

The present system offers large capacity with 2,048-I/O point capacity, 24-K word data memory capacity (Expansion Data Memory for up to 256K words) and 62K-word program capacity. No need to worry about running out of memory either, even when connected to a PT so that you can experience the full power of all PT Functions.

Read more »

CJ2H - OMRON PLC SYSMAC CJ2 series

SYSMAC CJ2 Programmable Controller
(with Built-in Multifunctional Ethernet Port)


The CJ2 is the result of years of experience as market leader in the field of modular controllers and represents a logical next step in controller design. It offers greater performance and faster I/O response as well as extreme scalability - so you will only need one family. In addition, programming, debugging and networking are faster and easier.

The CJ2H Series is ideal for advanced machine automation needs such as those required in image processing inspection of electrical components and high speed sorting on conveyors. It is the obvious choice for modern machine builders.

The CJ2 Family is a major opportunity to innovate and simultaneously reduce cost now and in the future.


Benefits / Features

The CJ2 Family is based on the highly popular CJ1, which after its launch in 2001 is operating in an extraordinary variety of applications all over the world. Now, as the natural successor, the CJ2 combines that field-proven technology with a wider choice of CPUs, more speed and memory, and a wider variety of communication interfaces.

Benefit 1: Open to the World

Data communication is via standard Ethernet port with EtherNet/IP Data Link function.
It supports major open networking technologies including:

• Ethernet-based communication based on open industrial standards
• Serial communications over RS-232C, RS-422, RS-485 and USB
• The major open Fieldbus standards
• Fast and accurate motion control networks.
• Simply connect the cable, with no settings required

Benefit 2: Advanced Motion Control
CJ2 units offer multi-axes synchronous control, and can replace expensive motion controllers.

Synchronized control is possible on up to 20 axes by using just five Position Control units (High-speed type). And, programming is easy - simply paste an electronic cam function block into a synchronized interrupt task.

Benefit 3: High Speed
Faster program execution and immediate I/O refreshing enables flexible machine control.

In addition to the greater CPU processing performance, Omron has also added new high-speed I/O units, such as analog input units with 20 μs conversion time, while new PLC instructions provide immediate access to fast I/O data. The result is even more real-time reliability.

Benefit 4: Fast Development - Learn One, Know Them All
Tag-based communications technology will simplify the interfacing of the PLC to the outside world. On-line debugging improvements also help to accelerate software development so you can change the code and test the results quickly.

The added function block memory will allow you improve to program structure and reuse of code even in the the entry-level models.

Thanks to the wide variety of CPUs with consistent architecture across all PLC families, you only need to learn one, and you will know them all.

Benefit 5: Highly Flexible
Adapt the PLC to your needs with the wide variety of compatible CJ1 Family I/O units (nearly 100).

To stay ahead in the machine-building business, you need to grow with your end-user's needs. Faster production, better quality control and better traceability require more speed and more memory.

 That's why the CJ2 Family offers a wide range of CPU capacity to suit any task. From 5 Ksteps program capacity and 64 Kwords memory, right up to 500 Ksteps capacity and 832 Kwords.


Powerful CJ2 Series - Built to Answer your Needs

Omron has used its long experience as a specialist machine automation supplier to develop CJ2. The result is an extremely reliable PLC that is also a powerful example of our commitment to continuous improvement.

Read more »

CJ1M - CJ1W - OMRON PLC SYSMAC CJ1 Series

OMRON SYSMAC CJ1 Programmable Controller

Versatile Machine Control with Faster Processing, Smaller Size and More Rapid Data Transfer 
Up to 2,560 I/O points and 250K steps program capacity.
Suitable for any application, from small device and temperature control, to large-scale control over networks.

Features

Fast
Versatile Machine Control with the Highest Performance Standards in the Industry. Fast New Flagship "R" CPU Units for the CJ1 Series.

*Conditions: 30 Ksteps, basic-to-special instruction ratio = 7:3, 128 inputs, 128 outputs
All Processes Speeded Up for Enhanced Application Performance.

*Conditions: 30 Ksteps, basic-to-special-to-floating-point decimal instruction ratio = 6:3:1, 128 inputs, 128 outputs, 2 Analog Input Units, 2 Position Control Units (4-axis Units)


Small

Super-compact design that meets the highest standards in its class. Even a narrow space in a machine serves as a control panel.

Compact Size Saves Space when Incorporated into Machines.
Contributes to Size Reduction in Devices and to Space Savings in Control Panels.

Super Compact:
Only 90 mm High and 65 mm Deep. Can Be Mounted in a Control Panel with Other Small Components.

Backplane-free Structure Enables Flexible-width Design: 
 Using I/O Units on Expansion Racks Further Improves Space Efficiency in Control Panels.

A Variety of Compact Units


Flexible

Suitable for any application, from small device and temperature control, to large-scale control over networks.

A Wide Variety of CPU Units and Other Units to Handle Virtually Any Type of Machine Control.

A Complete Lineup of CPU Units, from Low-end to High-end
Despite the wide variety of models, memory allocations, instructions, and I/O Units
are all compatible. This makes it easy to design migration from large-scale systems to small devices.

A Wide Selection of CPU Units to Match the Application
Select the optimum CPU Unit according to your system requirements.

Wide Selection of Unit Groups
Choose from a wide range of Units, from Basic I/O Units, Analog Units, and Position Control Units to Ethernet Units. All can be used with any of the CPU Units.

Basic I/O Units (29 models total)
A wide variety of products, such as high-density mountable connectors and removable terminal blocks, is available to meet your requirements.

Units for Special Applications (5 models total)
Units, such as the B7A, are available for interrupt inputs, quick-response inputs, and reduced I/O wiring.

Analog, Process-control, and Temperature Control Units (22 models total)
Input Units and Temperature Control Units are available to handle process data, such as temperatures, currents, and voltages. A complete lineup of models (including models with isolation between channels and high-precision models) is available for a wide range of applications.

Positioning Units (9 models total)
Various Units are available for control from High-speed Counter Units to Position Control Units for open-collector and line-driver pulse outputs and MECHATROLINK-II  communications and Motion Control Units for applications using motion language.

Note: MECHATROLINK-II is a registered trademark of the MECHATROLINK Members Association.

Communications Units (10 models total)
Units are available for general-purpose Ethernet, as well as for data links between PLCs, and the DeviceNet and CompoNet open networks.

Other Units (5 models total)
Units such as RFID Controllers and Data Collection Units are available to meet a wide range of needs.

Read more »

CS1H - CS1G - OMRON PLC SYSMAC CS1 Series

OMRON SYSMAC CS1 Series Programmable Controller  

OMRON SYSMAC CS1 Series Programmable Controller is High function controller platform supports up to 5,120 I/Os, 250K-step program memory and 448K-word data memory. Best fit for any large scale and complex automation system.

Factory Automation Solutions Superior Control to Accommodate Your Future Needs Today. 

The popular SYSMAC CS1 is better than ever finely tuned to allow new levels of control.

Features

High Performance

 In order to create facilities that have the production capability to withstand sudden changes in demand, or to create machinery that is easily distinguished from that created by market competitors, a top-speed controller that can deliver the performance required to support these needs is required. The SYSMAC CS1 PLCs have been equipped with the highest I/O responsiveness and data control functionality to significantly reduce processing time and to control machinery movement with greater precision.

Human Efficiency

 In order to allow easier development of complex programs, in addition to an integrated Windows-based development environment, the new PLCs are equipped with a variety of instructions. Structured programming functionality has been improved to allow programs to be reused with greater efficiency and thereby reduce labor requirements and cut costs.

Heritage

The know-how that our customers have accumulated through the years forms the core of their competitive strength. At OMRON, we believe in enhancing this know-how to the utmost. The key to doing this is 100% upward compatibility. CS1 PLCs allow existing Units and programs to be used without any changes.

Unit Versions

Unit versions have been introduced to control differences in functions featured by CPU Units that are the result of version upgrades.
The unit version is marked on the nameplates of products subject to version control, as shown in the diagram.

Use the improved SYSMAC CS1 PLCs to scale advanced systems to the optimum size.

Faster Instruction Execution and Faster Overall Performance

 In addition to further improvements to the instruction execution engine, which is the core of overall PLC performance, the high-speed RISC chip has been upgraded to realize the fastest instruction execution performance in the industry. Also, the new models have a mode where instruction execution and peripheral processing are processed in parallel, enabling balanced improvements in overall speed.

Common Processing: 1.6 Times Faster

The figures above are for high-speed, general-purpose PLCs with interchangeable boards.

PCMIX Value: 3 Times Higher

The PCMIX is the average number of instructions that can be executed in 1 μs and expresses the over execution performance of the ladder program. This unit was conceived to allow comparing the performance of PLCs from different manufacturers using a common metric.

Cycle Time: 2.5 to 4.8 Times Shorter
(Cycle time for 128 inputs and 128 outputs)

 
 With normal I/O refresh, 1-ms pulses are not lost even for large-capacity (e.g., 30-Kstep) programs. This allows use in applications requiring a high working accuracy, such as molding equipment.

LD Instruction Processing Speed: 2 Times Faster

The development of a special LSI to execute instructions and use of a high-speed RISC chip enable high-speed processing at the CPU.

OUT Instruction Processing Speed: 8 Times Faster

Programs consisting mainly of basic instructions are processed at ultrahigh speed.

Subroutine Processing Speed: 17.6 Times Faster

Cycle time overhead due to program structuring is minimized.

System Bus Baud Rate Doubled

The data transfer rate between the CPU Unit and certain Units has been doubled to further improve total system performance.

Reduced Variation in Cycle Time During Data Processing

Instructions that require long execution time, such as table data processing instructions and text string processing instructions, are processed over multiple cycles to minimize variations in cycle time and maintain stable I/O response.

Improved Refresh Performance for Data Links, Remote I/O Communications, and Protocol Macros

In the past, I/O refresh processing with the CPU Bus Unit only occurred during I/O refresh after instructions were executed. With the new CS1, however, I/O can be refreshed immediately by using the DLNK instruction. Immediate refreshing for processes peculiar to the CPU Bus Unit, such as for data links and DeviceNet remote I/O communications, and for allocated CIO Area/DM Area words when instructions are executed, means greater refresh responsiveness for CPU Bus Units.

Large Capacity CPU Units for Greater Component Control Power

The CS1 CPU Units boast amazing capacity with up to 5,120 I/O points, 250 Ksteps of programming, 448 Kwords of data memory (including expanded data memory) and 4,096 timers/counters each. With a large programming capacity, CS1 PLCs are not only ideal for large-scale systems but easily handle value-added applications and other advanced data processing.

Control Up to 960 Points with Units Mounted to the CPU Rack

The CS1 provides a high level of space efficiency. As many as 960 I/O points can be controlled by simply mounting ten Basic I/O Units, with 96 I/O points each, to the CPU Rack. Alternatively, as many as 80 analog I/O points can be used by mounting five Analog Input Units and five Analog Output Units. 

Wide Lineup Makes It Easy to Build the Optimum System 

A total of nine CPU Unit models provide for a wide range of applications, from small-scale systems to large. The lineup also includes Memory Cards, Serial Communications Boards, and a wide selection of Special I/O Units that can be used with any CPU Units to flexibly build the system that meets the requirements.Two Series of Expansion Racks Up to 50 m Long for Long-distance Expansion with Up to 72 Units and 7 Racks

With an expansion capacity of up to 80 Units and 7 Racks over a distance of 12 meters, the CS1 can meet large-scale control needs. Alternatively, an I/O Control Unit and I/O Interface Units can be used to connect two series of CS1 Long-distance Expansion Racks extending up to 50 m each and containing a total of up to 72 Units and 7 Racks. CS1 Basic I/O Units, CS1 Special I/O Units, and CS1 CPU Bus Units can be mounted anywhere on the Racks and programmed without being concerned about special remote programming requirements.

Note: C200H Units cannot be mounted on the Long-distance Expansion Racks.



Equipped with functions demanded by the production site to suit a variety of applications.

Nested Interlocks (for CPU Unit Ver. 2.0 or Later)

 Although strictly speaking the present interlock instructions do not allow nesting, applications can be created to include combination of complete and partial interlock conditions that achieve nested interlocks.

Easy Cam Switch Control with Ladder Instructions (for CPU Unit Ver. 2.0 or Later)

The time interval for execution by the GRY instruction is determined by the response speed for reading data from the absolute encoder.

Easy Calendar Timer Function (for CPU Unit Ver. 2.0 or Later)

TIME-PROPORTIONAL OUTPUT (TPO) Instruction (for CPU Unit Ver. 2.0 or Later)

Convert Between Floating-point Decimal and Character Strings

The new CS1 can convert floating-point decimal (real numbers) to character strings (ASCII) for display on a PT (operator interface). The data can be displayed on the PT as a character string display element.
The new CS1 can convert ASCII character strings read from measurement devices by serial communications to floating-point decimal data for use in data processing.

PID Autotuning

The new CS1 can autotune PID constants with a PID control instruction.
The limit cycle method is used for autotuning, so the tuning is completed quickly. This is particularly effective for multiple-loop PID control.

Highly Accurate Positioning with XY Tables

The new CS1 has many double-precision processing instructions for floating-point decimal operations, enabling positioning with greater accuracy.

Error Status Generation for Debugging

A specified error status can be simulated by executing the diagnostic instructions (FAL/FALS). With the new CS1, debugging is simple for applications that display messages on a PT or other display device based on the error status of the CPU Unit.

Easy Reading of Maintenance Data via DeviceNet (for CPU Unit Ver. 2.0 or Later)

The addition of special explicit message instructions makes it easy to send explicit messages without having to consider FINS commands. Transferring data among PLCs with explicit messages is also simplified.

Simpler Ladder Programs

Ladder programs that use a lot of basic instructions can be simplified using differentiation instructions LD NOT, AND NOT, and OR NOT, and instructions that access bits in the DM and EM Areas.

Binary Set Values for Timer/Counter Instructions

The SV for a timer or counter instruction can be specified using either BCD or binary. Using binary SV enables longer timers and higher-value counters.

Read more »

CS1D - OMRON SYSMAC CS1D

OMRON SYSMAC CS1D Programmable Controller (Duplex System)

Introducing the Duplex CPU, Dual I/O Expansion System!

Enhances facility and equipment reliability through hot standby CPUs, power supplies and redundant network. Hot Swap I/O function allows defective unit replacement during operation. 

Adding redundancy in the system is an effective step to reduce risk.

To respond to customer's needs regarding system reliability, OMRON applied its proven duplex PLC technology to the CS Series to provide a highly reliable PLC System.

These PLC Systems have redundant vital components (such as CPUs, power supplies, networks, and expansion cables), while retaining the CS1-series functions and capabilities that are suitable for a wide variety of applications.

Product Lineup

With the CS1D, you can select from a variety of redundant systems.

In addition to duplexed CPU Units and Power Supply Units, the customer can duplex other components, such as Communications Units (Controller Link or Ethernet) and Expansion Cables, to match the system requirements and provide a diverse range of duplex system configurations.

SYSTEM 1: Duplex CPU, Dual I/O Expansion System

The entire system can be duplexed, including a Duplex CPU System, Expansion System, and Expansion Cables, for superior redundancy and maintainability.

SYSTEM 2: Duplex CPU, Single I/O Expansion System

The main system components (such as the CPU Units, Power Supply Units, and Communications Units) can be duplexed and a Programming Device can be used to replace the Units during operation. This system is equivalent to the previous Duplex CPU System.

SYSTEM 3: Single CPU System

This system is ideal when you want to improve network redundancy and replace a Power Supply Unit or other Units online. The CPU Unit cannot be duplexed.

Features

The CS1D supports a variety of network configurations.

Ethernet can be duplexed as well as Controller Link, which both have a proven track record in FA applications.

In addition, a variety of networks are available for lower-level I/O, including DeviceNet, CompoNet, and the MECHATROLINK-II Motion Controller network. Both DeviceNet and CompoNet are open networks that boast a proven track record with the CS1 Series.

Equipped with New Functions for Maintenance!

Special Programming Devices and Displays are not required for Online Unit Replacement.

• A computer is not needed for onsite operations!
• Units can be replaced without knowing Programming Device procedures!

Units and Expansion Backplanes can be added online.

•  Functions can be added easily after the system has started operating, even if the system cannot be turned OFF or stopped.
• Adjustments and improvements can be easily made when setting up new systems without turning OFF the power.

While online, a Unit can be added easily to an empty slot. (This function is supported in Duplex CPU Single I/O Expansion Systems and Duplex CPU Dual I/O Expansion Systems).

In addition, an Expansion Backplane as well as its mounted Units can be added easily.


Even Stronger Redundancy! 

Expansion Cables can be duplexed and Units can be replaced Online.
By duplexing the Expansion Units and Expansion Cables, the Expansion Cables are duplexed and can be replaced during operation. In addition, cable disconnections are monitored so failures can be located easily.

Duplex Units can be replaced online.

Read more »

CJ2M - OMRON PLC SYSMAC CJ2M

OMRON SYSMAC CJ2M Programmable Logic Controller is New PLC with a Proven Record, 

Great for Basic Machine Automation

• Models with 2,560 I/O points max. and 5 to 60-Kstep capacity, with or without Ethernet port.
• Up to 40 I/O units on any CPU.
• Pulse I/O Modules add position control functions to any CPU.
• USB for plug-and-play access to the PLC.
• Choice of serial port plug-in modules.
• User-friendly programming, faster debugging.

Overview

Since 2001, CJ1M-series PLCs are in control of a wide variety of applications worldwide.

The accumulated experience and advanced technology now result in CJ2M:

Fully Compatible with CJ1 Units, Yet With Better Performance!

The CJ2M Series Programmable Logic Controller is ideal for packaging and general machine automation needs. Connectivity is assured thanks to the built-in USB port and the choice of Ethernet and RS-232C/422/485 interfaces on the CPU.

* Supported by the CJ2M CPU Unit with version 2.0 or later.

Pulse I/O Modules

By mounting optional pulse I/O modules, you can extend the functionality of any CJ2M CPU with:

• Interrupt inputs

• High-speed counters

• Incremental encoder inputs

• Pulse frequency control outputs

• Pulse width control outputs

Up to two modules can be mounted per CPU, allowing direct control of four motion axes. Using dedicated instructions, these axes can be controlled directly by the PLC program, without communication delays.

Benefits / Features

Built-in Ethernet/IP Port

Reduce Network Installation and Wiring Cost

CJ2 CPU Units are available with Ethernet/IP ports, which can be used with peripheral devices for universal Ethernet technology, e.g. cables, hubs and wireless devices.

Multiple Functions Can Be Executed Simultaneously on One Port.

Support Software, Data Links, Message communications between PLCs, FTP Communications

Easy to build the system without changing the port connection.

Efficient Programming with Tag Symbols

Previously, when data was exchanged by specifying address and addresses were changed, the program had to be changed at other Controllers and various operations, such as memory checks, had to be performed.

Now, tag names reduce the dependence on a memory map and the need for checking items affected by changes. This allows equipment to be easily added or upgraded.

* CJ2M-CPU3☐ : 2,000 max.

Versatile Position Control

Advanced Motion Control System with Low Cost and Easy Operation

No Special Controller Is Required. Build Your System with Ladder Diagrams.

The lineup now includes Position Control Units with EtherCAT communications in additions to models with pulse-train outputs. The CJ2 Programmable Logic Controller covers a wide range of applications from positioning control to synchronized multi-axis control.

The Position Control Units with EtherCAT interface use the same positioning functions* as high-speed pulse-train Position Control Units, and the programming interface is also the same.

You can easily switch the unit type between the Position Control Units depending on the application.

* Except Synchronised multi-axis

Easy Startup of Network, High-speed Starting of Pulse-train Control Up to 16 axes

Industry's HIGHEST Class Performance

Faster, More Precise Systems, with Less Wiring

High-speed starting and control performance equivalent to those of pulse-train systems are now possible via EtherCAT network connections.

Read more »

CJ1M - OMRON PLC SYSMAC CJ1M

OMRON SYSMAC CJ1M Programmable Controller 

Lineup of Low-end Models with 160 to 640 I/O Points and 5 to 20-Kstep Capacity.

Providing Greater Added Value for Small-scale Machines. Now Available with Built-in Ethernet Models!

• Compact 90 × 65 mm (H × D) dimensions are first class in the industry.
• SYSMAC CJ-series CPU Unit with the functionality of an Ethernet Unit.
• The CPU functional element has the same functionality as a CJ1M-CPU11/12/13. The enables effective usage of legacy applications.
• High-capacity Memory Cards up to 128 MB can be installed, and used to backup the program and system settings, or log customer data.
• The large instruction set can support diverse applications. Four types of programming are supported (ladder, structured text, sequential function charts, and instruction lists), with approximately 400 instructions and 800 instruction variations.
• These CJ-series CPU Units support structured programming using function blocks, which can improve the customer's program development resources.
• The various protection functions provide improved security to protect valuable software resources and property.
• The CPU Units are compatible with the CX-One Integrated Tool Package. Information for each component can be linked, and the system's data can be integrated into one database. The software can provide total support from PLC settings to network startup.

Features of OMRON PLC CJ1M-CPU11/21

Small yet Powerful, and Now in More Cost-efficient Models

Lineup of Low-end CPU Units with Basic Functions Plus High Added Value

• Program capacity of 5 Ksteps and up to 160 I/O points: For small-scale machine control yet including all the basic functions of the CJ Series.
• Standard features include a Memory Card interface and RS-232C port for serial communications.
• CPU Units with Pulse I/O have built-in high-speed counter inputs and pulse outputs for greater added value for machines.

 

Save Space

Improve Productivity

Execute LD instructions at 100 ns and MOV instructions at 0.3 µs for higher machine speed.

Broad Range of Communications with RS-232C Port without Special Programming

Linking to a PT or between CJ1M CPU Units is supported as a standard feature.

Flexible Data Handling with Memory Cards

Features of the CJ1M-CPU21 CPU Unit with Pulse I/O

Encoder Inputs for Two Axes

Measure Rotation Data

Four Interrupt of Quick-response Inputs

High-precision Pulse with Variable Duty Factor (PWM) Output

High-speed Pulse Outputs for Two Axes

Wide variety of pulse output functions, such as 100-kHz isokinetic or trapezoidal acceleration/deceleration for speed control, origin searches, trapezoidal positioning with acceleration/deceleration, interrupt feeding, and changing the target position during positioning.

Acceleration/Deceleration with Shock Suppression

Common Features

Fast, Small and Seamless!

The CJ1 Series has expanded to meet the requirements of compact and general-purpose devices and to support the downsizing of machinery with greater added value.

Contributing to Machine Downsizing

The CPU Unit is half the size of the CJ1G/CJ1H CPU Unit.

Built-in Positioning Functions

Lineup includes CPU Unit with built-in pulse input/output functions. This CPU Unit can be used for simple positioning, allowing further downsizing.

Combining Units with Greater Efficiency

The CJ1M does not require a backplane allowing Units to be combined flexibly. Despite not having a backplane, it is still possible to leave words empty for future expansion. Systems can be expanded to include more I/O without making any changes to existing I/O word allocations.

More freedom and higher precision pulse I/O control provides greater added value to machines.

Suitable for:

• Packaging equipment
• Foodstuff equipment
• Electronic component assembly equipment
• Inspection equipment
• Substrate transfer equipment

Read more »

CQM1H - OMRON PLC SYSMAC CQM1H

OMRON SYSMAC CQM1H Programmable Controller

Distributed Control with Compact PLCs

Its compactness and rack-less modular design allows easy system expansion and automation to suit user control requirement. With task-dedicated inner-boards, specialized I/O and high speed communication module, CQM1H promised a powerful and user-friendly solution.



Featres of OMRON SYSMAC CQM1H Programmable Controller

Control Functions

Equipment functions can be upgraded easily with a variety of advanced Inner Boards

The CQM1H features Inner Boards that allow simple positioning, multi-point high-speed counter inputs, absolute rotary encoder inputs, analog I/O, analog settings, and serial communications for connection to standard serial devices. Select Inner Boards to customize the PLC's capabilities for your applications.

Communications

Build a distributed control system with the high-speed, high capacity Controller Link System

Through Controller Link Network, it is easy to manage a distributed control system from a central location to gather and share operating data, production progress at each machine, and quality data. It offers the convenience of remote monitoring and maintenance on the PLC operation and application program/data. The CQM1H Control Link Unit is able to support automatic data link and event message communication with OMRON PLCs such as CS1 series, C200HX/HG/HE, CV Series PLCs.

Improve Communication Compatibility with the Serial Communication Board

Connections can be easily made to general-purpose machine components and dedicated controllers. The Serial Communications Board (an Inner Board) supports protocol macros. You can create macros for protocols to match the communications specifications of an external device, allowing data transfer with devices such as temperature controllers and bar code readers to be executed with a single PMCR instruction in PLC program.

Establish High-speed/Long-distance Fieldbus Communications with CompoBus/S and DeviceNet

Suitable for small-sized equipment for high-precision temperature control, which is opened and closed frequently. An effective operation can be achieved.
A wealth of monitoring and setting methods greatly improve the HMI

Applies Programming Devices and Programmable Terminals (PTs) can be connected to up to 4 ports. You can set up and monitor machine control from a PT while monitoring or programming from a Programming Console or a personal computer. It is even possible to monitor and program the PLC remotely from a personal computer connected through modem to heat sealing of non-perishable food box.

Improved application Development Environment 

Applies to the heater control by a forming machine for PET bottle or plastics.

Read more »

CP1E - OMRON PLC SYSMAC CP1E

SYSMAC CP1E Programmable Controller is Economy, Easy and Efficient Package PLC for Small Scale System.

The CP1E PLC is designed to meet the needs of manufacturers requiring high performance and advanced functionality at an economical price.




Benefits / Features OMRON PLC SYSMAC CP1E


Easy Ladder Programming with “Smart Input”

Easy Input Editor

• Instruction and Address Input Assist Functions

When you begin typing an instruction from the keyboard in Ladder Editor Mode, suggested instructions are displayed and the addresses are automatically entered.

Connecting lines are added automatically based on the cursor position, enabling intuitive ladder programming.

Easy Input Editor with Smart Input Function
When you begin typing an instruction in Ladder Editor Mode, suggested instructions are displayed.

User-friendly Ladder Program Input

• Automatic Connecting Line Insertion

With the automatic connecting line insertion function the necessary connection is added automatically based on the curser position.

• Automatic Column Insertion When Inserting Instructions

 The column is automatically inserted when an instruction is added even if the curser is above another instruction.
Easily Reuse Ladder Programming 

• Copying with Address Incrementing

 To create the same group of ladder instructions more than once, with the address addition copy function, the instructions can be reused simply by inputting an address offset.

• Intuitive Menu Display

An intuitively designed menu structure makes it easy to see the overall system simply by looking at the menu for smooth operation without referring to a manual.

Commercially Available USB Cables Can Be Connected

CP1E CPU Units use USB for the peripheral port. Computers can be connected using commercially available USB cables. Without the need for USB conversion cables or special cables, connection is easier and cable cost is low.

I/O Status at a Glance

The terminal layout display features I/O indicators. The indicators are in the same position as the terminals to let you see the I/O status at a glance. You can easily identify I/O status or perform status checks at startup or during operation.
More Applications with Advanced Control Capabilities and Functionality (N-/NA-type only)

 The CP1E N/NA-type CPU Units are equipped with high-speed counters, pulse outputs, and a built-in serial port. An option board for an additional Serial or Ethernet communication port is available. These features enable controlling a wide range of devices.

Read more »

CP1L - OMRON PLC SYSMAC CP1L

OMRON SYSMAC CP1L Programmable Controller is Standard Package-type PLC

Complete with a standard-feature USB port, CP1L PLCs include CPU Units for applications with as few as 10 points. Whether you need simple sequence control or pulse I/O and a serial port, the CP1L PLCs give you an economical choice from among 10-, 14-, 20-, 30-, 40- and 60-point CPU Units.

Fetures of OMRON SYSMAC CP1L Programmable Controller

Basic PLC with Smart Features

With the introduction of CP1L, users now can enjoy the benefits of the Smart Platform Technology even in the basic range at a affordable cost.

The CP1L supports Mathematical and PID instructions whereby the PLC can be used from simple to complex application.

Furthermore, the CP1L shares the same common architecture with the other range of PLCs which means that programs written can be migrate over without any modifications.

Enjoy the Benefits of Multiple Programming Language 

CP1L provides you with an option of three programming languages : Function Blocks, Ladder Diagram and Structure Text which can help to reduce Development and Troubleshooting time.  

Easy Connection with USB
The CP1L series provides built-in USB connection for easier communication. Suitable for user without serial communication port on their laptops.

Easy Maintenance and Startup Adjustments with LCD Displays and Settings

Attach an LCD Option Board to the CPU Unit to easily monitor or change data values in the PLC to visually check error status.

Motion Control with Precise Accuracy

Pulse Output

The CP1L series comes with two-axis pulse output control at 100khz (max). It support the Full Range of Functions for motion control such as Origin Search Function, Trapezoidal Acceleration and Deceleration, and etc.

High-speed Counter

A maximum of the four-axis counter of Single phase inputs are supported. Two-axis for Differential phase input. In additional, interrupt inputs are also provided.

ModBus RTU

The CP1L with the optional Serial communication port, support Modbus-RTU communication without any programming.

Increased Numbers of I/Os and Memory Capacities

With a wide range of selections for the CP1L, User can chose the PLC that suit his applications. Expansion is also available for different models.

CP1L-L 

I/O Size : 10 

Program capacity: 5 K steps
Execution speed: 0.55 µs

CP1L-L

I/O Size : 14 or 20 

Program capacity: 5 K steps
Execution speed: 0.55 µs
No of Expansion Unit : 1

CP1L-M

I/O Size : 30, 40, 60 

Program capacity: 10 K steps 

Execution speed: 0.55 µs No of Expansion Unit : 3

Network Capabilities with Serial Communications

Data sharing between PLCs can be achieved using the serial PLC link by connecting in series with RS 485/RS 422 configurations. Communication with other devices such as Inverters and Analog Meter can also be done as seen in the diagram.

 
Optional Boards
Two types of communications are available.
Either two RS-232C ports , two RS-422A/485 ports or two Ethernet ports can be used.

Read more »

CPM1A - OMRON PLC SYSMAC CPM1A

SYSMAC CPM1A Programmable Controller is Pack All Basic Functions Into a Compact Size.  

The SYSMAC C Series began developing s wide range of PLCs to meet factory automation needs in 1973. And now the CPM1A joins the C series history as a small PLC that has all the far less mounting space. 

The CPM1A also provides flexibility in I/O capacity ranging from 10 to 100 I/O points. The CPM1A can replace relay control, help distribute I/O, work as a miniature machine controller or sensor controller, or fill many other vital roles in factory automation.

Features of SYSMAC CPM1A Programmable Controller

Flexible Control and Plenty of Power in the Minimum Body Size

The CPM1A can be easily built into a wide array of machines or control panels. For example, you can use the CPM1A to control a few more I/O points on existing lines without having to install a new control panel. Just install the CPM1A in available space to control only the required number of I/O. The CPM1A was born to reduce waste in the factories by effectively using valuable space.
 Select Units to Control from 10 to 40 Input Output I/O points and, in combination with Expansion I/O units, can be used to control a total of from 10 to 100 points.

Note: Only 30- and 40-point CPUs support Expansion I/O Units. Up to three Expansion I/O Units can be connected.

CPM1A-20EDR1/-20ESDT(1)
CPM1A-8ED/-8ER/8ET(1)


Easy Connection to Programmable Terminals

An optional Communication Adapter supports Host Link or NT Link connections for high-speed communications with OMRON PTs.

Windows-based Support Software

The Windows-based CX-Programmer Support Software reduces Software development time and provides powerful monitoring and debugging functions. Other Windows applications can be used and the programming environment has been greatly improved.

CX-Programmer's many monitoring and debugging functions provide powerful support for multiple program development.

• User-friendly operations
• Powerful display/monitoring functions
• Powerful debugging functions
• Remote programming and monitoring
• Maintenance functions
• Data compatibility with Windows applications

Programming Consoles

Hand-held Programming Consoles are ideal for onsite startup and adjustments.

Full Functionality in a Compact Body

Plenty of programming capacity and a large instruction set handle even complex control operations.

• User Memory: 2,048 words
• Data Memory: 1,024 words
• Timers/Counters: 128
• Basic instructions: 14
• Special instructions: 79
• Analog adjustment: 2

High-speed Execution

LOAD instructions execute at 1.7 µs, MOVE instructions at 16.3 µs, for a fast program execution. High-speed scanning is thus possible even with large programs. Interrupt inputs and quick-response inputs can be used to handle high-speed pulse that are too fast for the scan time.

Read more »

CPM2A - OMRON PLC SYSMAC CPM2A

Growing Control Power and Intelligence with CPM2A Series MICRO PLC

The advanced CPM2A series micro controller delivers you the most feature-packed micro solution in control industry. With wide variance of built-in I/O points and supply voltage, this small packaged controller offers its rich instruction set, convenient built-in multiple communication interfaces to programming peripherals, SCADA host or HMI device.

Its high speed I/O processing enable easy implementation of motion control application. Distributed and autonomous control system could be realized through the hi-speed CompoBus/S interface to the CPM2A.

Features of SYSMAC CPM2A Programmable Controller

Synchronized Control

Synchronized pulse control multiplies the frequency of a pulse input by a preset scaling factor and generates a synchronized pulse output at that frequency. The scaling factor can be changed from the ladder program, so packaging can continue while adjusting the feed rate of packaging film or the position of labels.

High Speed Processing

High-speed processing include the 50-µs quick-response inputs, improved scan time (up to 500 program steps in 1 ms), and interrupts. Improved processing can increase productivity; for example, the timing between detection of a label mark and detection of the product can be adjusted.

High Speed Counters

The CPM2A support one-axis high-speed counters(20kHz single-phase or 5kHz two-phase) and four-axis high speed counters(2 kHz single-phase only). The length of workpieces such as cardboard or string can be measured at high speed.

Position Control Functions 

Supports a one-axis pulse output(10kHz) with trapezoidal acceleration and deceleration and two-axis simple pulse output.

Temperature Control and Monitoring 

Mount a Temperature Sensor Unit to monitor and control temperatures using PID instruction operands and ON/OFF output signals sent with the PWM instruction. Use in combination with a PT for simple temperature monitoring and setting.

Analog Control Function 

Analog control is possible using the optional Analog I/O Unit which can be interfaced to wide range of I/O devices via analog voltage or current signal.. Input from pressure sensors. Output to inverters. Interfaces with a wide range of devices.

Easy Communication Interface

Compatible with the OMRON Programmable Terminal's Programming Console functions. Maintenance is simplified with the on-screen programming operations.

Easy Maintenance 

Quick Backup of Program and Data

The handy EMU unit is meant for quick backup of micro PLC's application program and data. It offers convenience in the event of application program update of equipment at remote site without the needs of PC or other programming peripheral.

Powered by CX-Programmer 

Simplify Programming with the Windows-based CX-Programmer

The CX-Programmer supports the development of multiple programs with a wide variety of monitoring and debugging functions.

Distributed and Autonomous Control Solution 

Faster and More Flexible Operation with Distributed Control Configuration

The CPM2A allows line additions, faster operation, and reduced system startup time. The production line can be made part of a distributed control system by connecting the optional CompoBus/S I/O Link Unit to the CPM2A. With distributed control, the production line can be converted to modular systems for reduced startup time and higher line speeds.

Read more »

CPM2C - OMRON PLC SYSMAC CPM2C

An Ultra-slim CPM2C - The Enabler of Creative and Distributed Control Solution

The CPM2C micro controller redefine the horizon of micro controller by inheriting the CMP2A rich instruction set, high speed processing in the ultra compact housing. Modular I/O architecture and flexible configuration have enable CMP2C to address diversed application needs.

Features of SYSMAC CPM2C Programmable Controller

Synchronized Control

Synchronized pulse control multiplies the frequency of a pulse input by a preset scaling factor and generates a synchronized pulse output at that frequency. The scaling factor can be changed from the ladder program, so packaging can continue while adjusting the feed rate of packaging film or the position of labels.

High Speed Processing

High-speed processing include the 50-µs quick-response inputs, improved scan time (up to 500 program steps in 1 ms), and interrupts. Improved processing can increase productivity; for example, the timing between detection of a label mark and detection of the product can be adjusted.

High Speed Counters

The CPM2A support one-axis high-speed counters(20kHz single-phase or 5kHz two-phase) and four-axis high speed counters(2 kHz single-phase only). The length of workpieces such as cardboard or string can be measured at high speed.

Position Control Functions 

Supports a one-axis pulse output(10kHz) with trapezoidal acceleration and deceleration and two-axis simple pulse output.

Temperature Control and Monitoring 

Mount a Temperature Sensor Unit to monitor and control temperatures using PID instruction operands and ON/OFF output signals sent with the PWM instruction. Use in combination with a PT for simple temperature monitoring and setting.

Analog Control Function 

Analog control is possible using the optional Analog I/O Unit which can be interfaced to wide range of I/O devices via analog voltage or current signal.. Input from pressure sensors. Output to inverters. Interfaces with a wide range of devices.

Simultaneous Communication Interface

Resin Forming
Applies to the heater control by a forming machine for PET bottle or plastics.

Easy Maintenance 

Quick Backup of Program and Data

The handy EMU unit is meant for quick backup of micro PLC's application program and data. It offers convenience in the event of application program update of equipment at remote site without the needs of PC or other programming peripheral.

Powered by CX-Programmer 

Simplify Programming with the Windows-based CX-Programmer

The CX-Programmer supports the development of multiple programs with a wide variety of monitoring and debugging functions.

Distributed and Autonomous Control Solution 

Faster and More Flexible Operation with Distributed Control Configuration

The CPM2A allows line additions, faster operation, and reduced system startup time. The production line can be made part of a distributed control system by connecting the optional CompoBus/S I/O Link Unit to the CPM2A. With distributed control, the production line can be converted to modular systems for reduced startup time and higher line speeds.

Read more »

ZEN - OMRON PLC ZEN V2

ZEN V2 Units Programmable Relay 

Even Broader Applications with Increased Functionality and Higher Precision

• Increased functionality in a compact body (70 mm wide × 90 mm high).
• Easy programming is available using the LCD and operation buttons. (See note 1.)
• This single Unit easily provides relay, timer, counter, and time switch functions.
• Expansion is easy with Expansion I/O Units, allowing up to 44 I/O points. (See note 2.)
• Economy-type and Communications-type CPU Units have been added to series.
• Improved Weekly Timers (See note 1.)
• Increased timing accuracy with a monthly deviation of ±15 s max. Multiple-day operation and pulse output operation have been added.
• Select from two power supply options: 100 to 240 VAC or 12 to 24 VDC.

Easy and Simple Programming for Automatic Small-scale Control

Saves Space, Wiring, and Installation Steps

• Versatile functionality in a compact body (70 mm wide × 90 mm high).
• This single Unit easily provides relay, timer, counter, and time switch functions. Wiring work is greatly reduced because separate wiring is not required for devices such as timers and counters.

 Easy Programming

The LCD screen comes with 8 operation buttons on the front panel to enable programming in ladder view format. The LCD screen also has a backlight, making it easier to see when the ZEN is used in dark locations.

Flexible Expansion Enables Up to 44 I/O Points

Up to three Expansion I/O Units can be connected if there are not enough I/O points. Expansion I/O Units are only 35 mm wide.
Note: CPU Units with 10 I/O points can be expanded to 34 I/O points. Expansion I/O Units cannot be connected to Economy-type CPU Units.

Support Software with Simulation Function

• Programs can be easily written, saved, and monitored by personal computer.
• Programs can be simulated on the personal computer without connecting to the ZEN.

Note: For notebook computers that do not have an RS-232C serial port, connect the computer to the ZEN by connecting an OMRON CS1W-CIF31 USB-Serial Conversion Cable to the ZEN-CIF01 Connecting Cable.

Other Versatile Functions

• Use of a Memory Cassette makes it easy to copy and save programs.
• Equipped with two analog input channels (CPU Units with DC power supply only).
• Password function ensures security. (See note.)
• Multi-language display in six languages (English, Japanese, German, French, Spanish, Italian). (See note.)
• Display user-set messages or analog-converted values. (See note.)

Note: Not supported for ZEN-oC2oo-o-V2 models.

Enhanced Features of V2 CPU Units

Improved Weekly Timer and Calendar Timer Functions
Note: Not supported for ZEN-oC2oo-o-V2 models.

• The time precision has been increased.
• Multiple-day operation and pulse-output operation are now possible.
• These improved functions are convenient for time-controlled applications such as lighting and air conditioning control

Economy-type Added to the Series
Economy-type CPU Units with a more affordable price have been added to the series, although Expansion I/O Units cannot be added.

12 to 24 VDC Line Voltage Operation
Operation is now possible with 12 VDC.

Expansion I/O Units have been reduced to half-size (35 mm wide)

RS-485 Communications Model Added to Series
Production line conditions can be remotely monitored by monitoring the ZEN control status.

More Precise Analog Input
Conventional model: ± 10% FS → -V2 models: ± 1.5% FS
DC power supply models are equipped with two analog inputs (0 to 10 V). There are four analog comparators. The increased precision makes it even easier to use the Unit in simple control applications with voltage, current, temperature, and other analog values.

8-digit Counter, 150-Hz Counter
• An 8-digit counter and 8-digit comparator have been added.
• The maximum count for DC power supply models is 150 Hz.

Twin-timer Operation Added
Twin-timer operation allows you to set ON and OFF times separately, greatly simplifying intermittent operation.


Series Configuration

ZEN-PA03024 Switching Mode Power Supply

Compact Power Supply (30 W) for ZEN

• Programmable Relays
• Slim size with a depth of 56 mm (W × H × D: 70 × 90 × 56 mm).
• EMI: Conforms to EN61000-6-3 (Class B).
• Allows parallel operation.
• Safety standards: UL508/UL60950-1/UL1604, CSA C22.2 No. 14/No.60950-1/No.213 (Evaluated by UL), EN60950-1 (VDE 0805 Teil 1), EN50178 (VDE0160)
• Output voltage: 24 VDC; Output current: 1.3 A; Capacity: 30 W
• Uses lead-free soldering.

Read more »