CPM2C - OMRON PLC SYSMAC CPM2C

An Ultra-slim CPM2C - The Enabler of Creative and Distributed Control Solution

The CPM2C micro controller redefine the horizon of micro controller by inheriting the CMP2A rich instruction set, high speed processing in the ultra compact housing. Modular I/O architecture and flexible configuration have enable CMP2C to address diversed application needs.

Features of SYSMAC CPM2C Programmable Controller

Synchronized Control

Synchronized pulse control multiplies the frequency of a pulse input by a preset scaling factor and generates a synchronized pulse output at that frequency. The scaling factor can be changed from the ladder program, so packaging can continue while adjusting the feed rate of packaging film or the position of labels.

High Speed Processing

High-speed processing include the 50-µs quick-response inputs, improved scan time (up to 500 program steps in 1 ms), and interrupts. Improved processing can increase productivity; for example, the timing between detection of a label mark and detection of the product can be adjusted.

High Speed Counters

The CPM2A support one-axis high-speed counters(20kHz single-phase or 5kHz two-phase) and four-axis high speed counters(2 kHz single-phase only). The length of workpieces such as cardboard or string can be measured at high speed.

Position Control Functions 

Supports a one-axis pulse output(10kHz) with trapezoidal acceleration and deceleration and two-axis simple pulse output.

Temperature Control and Monitoring 

Mount a Temperature Sensor Unit to monitor and control temperatures using PID instruction operands and ON/OFF output signals sent with the PWM instruction. Use in combination with a PT for simple temperature monitoring and setting.

Analog Control Function 

Analog control is possible using the optional Analog I/O Unit which can be interfaced to wide range of I/O devices via analog voltage or current signal.. Input from pressure sensors. Output to inverters. Interfaces with a wide range of devices.

Simultaneous Communication Interface

Resin Forming
Applies to the heater control by a forming machine for PET bottle or plastics.

Easy Maintenance 

Quick Backup of Program and Data

The handy EMU unit is meant for quick backup of micro PLC's application program and data. It offers convenience in the event of application program update of equipment at remote site without the needs of PC or other programming peripheral.

Powered by CX-Programmer 

Simplify Programming with the Windows-based CX-Programmer

The CX-Programmer supports the development of multiple programs with a wide variety of monitoring and debugging functions.

Distributed and Autonomous Control Solution 

Faster and More Flexible Operation with Distributed Control Configuration

The CPM2A allows line additions, faster operation, and reduced system startup time. The production line can be made part of a distributed control system by connecting the optional CompoBus/S I/O Link Unit to the CPM2A. With distributed control, the production line can be converted to modular systems for reduced startup time and higher line speeds.

Posted in: Micro PLCs