3/06/2010
Mr. PH
OMRON SYSMAC CS1D Programmable Controller (Duplex System)
Introducing the Duplex CPU, Dual I/O Expansion System!
Enhances facility and equipment reliability through hot standby CPUs, power supplies and redundant network. Hot Swap I/O function allows defective unit replacement during operation.
Adding redundancy in the system is an effective step to reduce risk.
To respond to customer's needs regarding system reliability, OMRON applied its proven duplex PLC technology to the CS Series to provide a highly reliable PLC System.
These PLC Systems have redundant vital components (such as CPUs, power supplies, networks, and expansion cables), while retaining the CS1-series functions and capabilities that are suitable for a wide variety of applications.
Product Lineup
With the CS1D, you can select from a variety of redundant systems.
In addition to duplexed CPU Units and Power Supply Units, the customer can duplex other components, such as Communications Units (Controller Link or Ethernet) and Expansion Cables, to match the system requirements and provide a diverse range of duplex system configurations.
With the CS1D, you can select from a variety of redundant systems.
In addition to duplexed CPU Units and Power Supply Units, the customer can duplex other components, such as Communications Units (Controller Link or Ethernet) and Expansion Cables, to match the system requirements and provide a diverse range of duplex system configurations.
SYSTEM 1: Duplex CPU, Dual I/O Expansion System
The entire system can be duplexed, including a Duplex CPU System, Expansion System, and Expansion Cables, for superior redundancy and maintainability.
SYSTEM 2: Duplex CPU, Single I/O Expansion System
The main system components (such as the CPU Units, Power Supply Units, and Communications Units) can be duplexed and a Programming Device can be used to replace the Units during operation. This system is equivalent to the previous Duplex CPU System.
SYSTEM 3: Single CPU System
This system is ideal when you want to improve network redundancy and replace a Power Supply Unit or other Units online. The CPU Unit cannot be duplexed.
Features
The CS1D supports a variety of network configurations.
Ethernet can be duplexed as well as Controller Link, which both have a proven track record in FA applications.
Ethernet can be duplexed as well as Controller Link, which both have a proven track record in FA applications.
In addition, a variety of networks are available for lower-level I/O, including DeviceNet, CompoNet, and the MECHATROLINK-II Motion Controller network. Both DeviceNet and CompoNet are open networks that boast a proven track record with the CS1 Series.
Equipped with New Functions for Maintenance!
Special Programming Devices and Displays are not required for Online Unit Replacement.
- A computer is not needed for onsite operations!
- Units can be replaced without knowing Programming Device procedures!
Units and Expansion Backplanes can be added online.
- Functions can be added easily after the system has started operating, even if the system cannot be turned OFF or stopped.
- Adjustments and improvements can be easily made when setting up new systems without turning OFF the power.
In addition, an Expansion Backplane as well as its mounted Units can be added easily.
Even Stronger Redundancy!
Expansion Cables can be duplexed and Units can be replaced Online.
By duplexing the Expansion Units and Expansion Cables, the Expansion Cables are duplexed and can be replaced during operation. In addition, cable disconnections are monitored so failures can be located easily.
Duplex Units can be replaced online.
Posted in: Modular PLCs
0 komentar:
Posting Komentar